Using the ribbon tension option, Using the ribbon tension option -107 – HID DTC400E/C30E/M30E User Guide User Manual
Page 231
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
6-107
Using the Ribbon Tension Option
Step Procedure
1
Use the Ribbon Tension option to increase the amount of tension (drag) on
the Ribbon during printing.
Enter a negative value to decrease the amount of tension that is placed on
the Ribbon during printing
OR
Enter a positive value to increases the amount of tension that is placed on
the Ribbon during printing.
Advertising