HID DTC400E/C30E/M30E User Guide - Manual (Page 193)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-69
the Back option (via the Back radio button).
• Use the Defined Area arrows to navigate back and forth from area to area
in the Front or Backside area. (Note: The active area will always be
highlighted with a dotted outline.)
• Define another area by clicking on the Defined Area UP arrow.
• Another .2" x .2" / 5mm x 5mm area will appear in the lower left-hand
corner. (Note: This is the location in which all newly defined areas will
first appear.)
• New areas are always created in the same position with the same size
so it is recommended to move or resize them as they are created.
• All five defined or undefined areas can be added without moving the
previous one to another location. The up arrow on the Defined Area
control can be activated five times in a row and there are five areas
added. After five areas are added there appears to be only one until
you move each one to a different location.
• Delete an area by using the Defined Area arrows to select the area and
click Delete. (Note: If all areas are deleted, the K Panel Resin options will
automatically be deselected.)