Using the test print button, Using the test print button -9 – HID DTC400E/C30E/M30E User Guide User Manual
Page 133
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
6-9
Using the Test Print button
Step Description
1 Click
Test Print to send a simple self-test print to the DTC400e or C30e
Printer.
•
Ensure that an YMCKO Ribbon is installed.
•
Ensure that the computer is effectively communicating with the Printer
and that the Printer is functioning properly.
•
Ensure that an YMCKOK Ribbon is installed in order for a
DTC400e/C30e Card Printer with a Flipper Table Module to print a dual-
sided image.
2 Click
Test Print to send a simple self-test print to the M30e Printer.
•
Ensure that the Ribbon is installed for M30e
•
Ensure that the computer is effectively communicating with the Printer
and that the Printer is functioning properly.
Ensure that the Ribbon is installed in order for a M30e Card Printer with a
Flipper Table Module to print a dual-sided image.