Using the workbench (to erase the card), Using the workbench (to erase the card) -13 – HID DTC400E/C30E/M30E User Guide User Manual
Page 251
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)
7-13
When the Re-Writeable Ribbon is selected, the DTC400e/C30e driver will show only relevant
options when the Re-Writeable Ribbon Type is displayed.
Step Description
1
The following options are removed from the Device Options tab when the Re-
Writeable Ribbon Type is selected. See below.
• Print Both Sides
• Print Back Side Only
Rotate Back 180 Degrees (dual side printers only)
2
The following options are available in the Device Options tab when the Re-
Writeable Ribbon Type is selected. See below.
• A Write Only checkbox is displayed when the NONE Re-Writeable
Ribbon Type is chosen.
• Disable printing
• Rotate Front 180 Degrees
Using the Workbench (to erase the card)
Step Description
1
Open the Diagnostic Tool box.