EXFO FTB-800 Series for FTB-1 - Manual (Page 176)

Test Setup - Test Configurator, Timer, and System
166 FTB-700G/800 Series
Network

Address, available with Static mode, allows to select the
Link-Local IPv6 Address. The accepted range is from
FE80:0000:0000:0000:0000:0000:0000:0000 to
FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address
is FE80::[Interface ID], where [Interface ID] is generated from
the source MAC address. When the Address field is selected for
editing using virtual keyboard, the Previous IPs button appears
allowing to select a previously configured IP address.

Global IPv6 Address (GUA) is used to communicate with on-link
neighbors and for global communication with hosts outside the
subnet.

Mode
None disables the Global IPv6 Address and the Default Gateway
Address.
Stateless Auto (default) allows automatic generation of the IPv6
address based on the Link-Local address interface ID and the
prefix obtained from the router advertisements. If no Interface ID
has been obtained for the Link Local Address, the global address
will not be generated.
Static allows to enter the IP address.

Address, available with Static mode, allows to select the Global
IPv6 Address. The accepted range is from
0000:0000:0000:0000::[Interface ID] to
FFFF:FFFF:FFFF:FFFF::[Interface ID]. The default address is
2001:0000:0000:0000::[Interface ID], where [Interface ID] is
generated from the source MAC address. When the Address field
is selected for editing using virtual keyboard, the Previous IPs
button appears allowing to select a previously configured IP
address.