EXFO FTB-800 Series for FTB-1 - Manual (Page 357)

Test Results
NetBlazer 347
Summary (EtherSAM)
Summary (EtherSAM)
From the Test menu, tap Results, and the Summary tab.
Note: For Dual Test Set, only the Start Time will be displayed on the remote
module.
Service Configuration/Performance Test Status
Indicates the actual test status as follows. The pas/fail verdict icon is
displayed next to the test status when enabled. A fail verdict is declared
when a Link Down or LOS is detected, or any SLA parameter fails during
the test.
Test Status Description
“--” Test has not started.
Disabled Test/subtests is/are disabled.
Running Test/subtest is currently running.
Data Transfer Test/subtest is running but no test traffic is being transmitted.
Completed, <Verdict> Test/subtest has completed with the test pass/fail verdict.