EXFO FTB-800 Series for FTB-1 - Manual (Page 375)

Test Results
NetBlazer 365
Summary (S-OAM)

RX Line Utilization meter and value, available with Loopback
function, indicate the line rate utilization percentage (only LBR frames
are considered) received in the last second.

TST RX Rate meter and value, available with Test function, indicate the
quantity of TST frames received in the last second.

Frame Delay meter and value, available with Frame Delay function,
indicate the average of the measured frame delays in the last second.

Frame Loss Ratio meter, available with Frame Loss function,
indicates for both Near-End and Far-End the last measured frame loss
ratio in the last second.

Synthetic Loss Ratio meter, available with Synthetic Loss function,
indicates for both Near-End and Far-End the last measured Synthetic
Loss ratio in the last second.
Note: Refer to S-OAM on page 324 for more alarms/errors/statistics information.
Summary
Note: Refer to S-OAM on page 324 for more information on alarms.
Thresholds
Refer to Thresholds on page 182 for more information.