EXFO FTB-800 Series for FTB-1 - Manual (Page 305)

Test Results
NetBlazer 295
Alarms/Errors
Inject Button

Layer: Allows to select on which layer is the alarm/error to be
generated. Choices depend on the test application and its interface.

Type: Allows to select the type of injection, either Alarms or Errors.

Defect: Allows the selection of the alarm/error defect to be generated.
Choices depend on the selected Layer and Type. Refer to
Alarms/Errors on page 246 for more information.

Mode and Rate/Amount

Manual allows to enter the amount of manual error to be
generated: 1 (default) through 50 or 100 (depends on the selected
error).

Rate allows the selection of the injection rate for the selected error.
The rate must be within the minimum and maximum values
specified.

Max Rate generates the selected error to its theoretical maximum
rate.