EXFO FTB-800 Series for FTB-1 User Manual
Page 374
Test Results
364
FTB-700G/800 Series
Summary (S-OAM)
Loopback / Test / Frame Delay / Frame Loss /
Synthetic Loss
Note: Either Loopback, Test, Frame Delay, Frame Loss, or Synthetic Loss
statistics are displayed according with the selected test function (refer to
Test Function on page 184).
Status displays the status of the test function.
For Loopback, Frame Delay, Frame Loss, and Synthetic Loss
functions:
For Test function:
Status
Description
Idle
No Results (function did not run yet).
In Progress Test is in progress. Frames are being transmitted and monitored.
Completed Test is completed:
The test with continuous transmission is manually stopped and
replies have been received or timed out.
The test with continuous transmission is automatically stopped by a
test timer and replies have been received or timed out.
All frames of the test with non-continuous transmission have been
transmitted and replies have been received or timed out.
Aborted
Test is aborted. The test with non-continuous transmission is stopped
before all the frames are transmitted.
Status
Description
Idle
No Results (function did not run yet).
In Progress Test is in progress. RX TST frames are being monitored.
Completed Test is completed. The test is stopped or function is disabled after being In
Progress state.