EXFO FTB-800 Series for FTB-1 - Manual (Page 381)

Test Results
NetBlazer 371
Summary (Traffic Gen & Mon)
Summary (Traffic Gen & Mon)
From the Test menu, tap Results, and the Summary tab.
Test Status
Indicates the actual test status as follows. The global test pass/fail verdict is
displayed next to the Test Status when enabled (see QoS Metrics on
page 227).

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Start Time
Indicates the date and time the test has been started. The date and time is
reset every time the test is restarted or reset.
Stream
The following statistics are available for each stream.

Current Throughput: See Streams - Throughput on page 334.

Frame Loss Rate: See Streams - Frame Loss / Out-of-Sequence on
page 332.

Jitter: See Streams - Jitter on page 332.

Latency: See Streams - Latency on page 333.

Out-of-Sequence: See Streams - Frame Loss / Out-of-Sequence on
page 332.