EXFO FTB-800 Series for FTB-1 - Manual (Page 317)

Test Results
NetBlazer 307
Logger and Alarms/Errors Logger
Logger and Alarms/Errors Logger
The Logger page displays color-coded events and pass/fail verdict.
From the Test menu, tap Results, and the Logger or Alarms/Errors
Logger tab.
Sort By

Sort By: Select the sorting order of the event logger entries:
ID/Time (default) displays the event logger entries in numeric
ascending order based on the ID column of the event logger table.
Event displays the event Logger entries in alphanumeric ascending
order based on the Event column of the event logger table.

Time Mode

Relative displays the time elapse since the beginning of the test or
since the last test reset. The format of the time is Dd HH:MM:SS.

Absolute (default) displays the date and time the event occurred.
The time format depends on the platform time settings.
When the platform is configured in 24 hours time format, the time
format is MM/DD HH:MM:SS.
When the platform is configured in 12 hours time format, the time
format is MM/DD HH:MM:SS <AM or PM>.
The logger table provides the following event logger information.

ID: Indicates the event identification number. The events are
sequentially numbered.

Time: Indicates when the event has been detected.

Event: Provides the event type and threshold crossing information.

Duration: Indicates the number of seconds within which the event
occurred. Test events like Test Started and Test Stopped will have no
duration.