EXFO FTB-800 Series for FTB-1 - Manual (Page 492)

Test Control
482 FTB-700G/800 Series
Report Button

Report Headlines and Content parameters are used to identify the
report and are not mandatory. Up to 30 characters are allowed for each
parameter.

Report Header could be the company name.

Report Title could be the name of the product, name of test, test
number, etc.

Optional Content allows to choose the optional content that can
be part of the report:
All (default) includes all optional content to the report.
None excluded all optional content from the report.
Custom allows to select the optional content to be part of the
report.

Choose Content, available when the Optional Content is set to
Custom, allows to select what will be part of the custom content.

Save Report

Auto-Generate File Name check box, when selected (default),
automatically generates the report file name which contains the
name of the test, the date (YY.MM.DD), and time (HH.MM.SS).
Clear the Auto-Generate File Name check box to enter a specific
file name.
File Name is the name of the report to be generated.

Save To is the media where the report file will be saved: Internal
Storage (default), or Removable Disk. Removable Disk is
available only when there is a removable disk/key connected to
the FTB-1 USB port. Internal Storage specifies to save the report in
Documents\810-880-NetBlazer\Reports.

Display Report after Saving check box when selected (default)
automatically displays the report once it is generated.
Note: Once generated, the report can be opened from the Open Tab on page 483.