EXFO FTB-800 Series for FTB-1 - Manual (Page 391)

Test Results
NetBlazer 381
Traffic - S-OAM
Traffic - S-OAM
From the Test menu, tap Results, Traffic, and the S-OAM tab.
Traffic Monitoring
Note: Only available with Carrier Ethernet OAM test application.
In TX, reports counts of CCM, LBM, LTM, DMM, LMM, SLM, TST, AIS, LCK,
and CSF frames transmitted. Total count is reported as well as unicast
and/or multicast frame counts when applicable.
In RX, reports counts of CCM, LBR, LTR, DMR, LMR, SLR, TST AIS, LCK, and
CSF frames received regardless of the sender as long as the destination
MAC address matches either the local MEP Unicast MAC address or a
Multicast class 1 address
1 . Total count is reported as well as unicast and/or
multicast frame counts when applicable.
Responder
Note: Available when the S-OAM Responder check box is selected.

For Carrier Ethernet OAM test application:
In TX, reports counts of LBR, LTR, DMR, LMR, and SLR total frames
transmitted.
In RX, reports counts of valid LBM, LTM, DMM, LMM, and SLM unicast,
multicast, and total frames received. A valid messages must have its
source MAC address matching the Peer MEP MAC address, destination
MAC address matching either the unit port Unicast MAC address or a
Multicast class 1 address
1
, VLANs matching the unit port VLANs, and
MEG/MD Level matching the local MEG/MD Level.
1. Refer to Unicast/Multicast Addresses for S-OAM on page 574 for more information.