EXFO FTB-800 Series for FTB-1 - Manual (Page 43)

Graphical User Interface Overview
NetBlazer 33
Application Buttons
Note: For information on how to install and activate software options, refer to the
FTB-1 User Guide. The module application must be restarted once a new
software option is installed in order to activate it.
Following is the list of available software options:
Options Description
DSn Digital Signal
DS1-FDL DS1/1.5M Facility Data Link
DS3-FEAC DS3/45M Far-End Alarm and Control
DUALRX Dual RX
DS3-G747 ITU-T Recommendation G.747
PDH Plesiochronous Digital Hierarchy
NI-CSU NI/CSU Emulation
SONET Synchronous Optical Network
SDH Synchronous Digital Hierarchy
TCM Tandem Connection Monitoring
52M 52 Mbit/s
155M 155 Mbit/s
622M 622 Mbit/s
2488M 2.488 Gbit/s
9953M 9.953 Gbit/s
100optical 100 Mbit/s optical interfaces.
GigE _Optical 1000Base-T and GigE optical interfaces.
GigE_ Electrical 1000Base-T electrical Interfaces.
10G_LAN 10G LAN optical interface.
10G_WAN 10G WAN optical interface.