EXFO FTB-800 Series for FTB-1 - Manual (Page 231)

Test Setup - Test Configurator, Timer, and System
NetBlazer 221
Streams - Global
The following parameters are global for all streams.

Total TX Rate indicates the percentage of the total line utilization
which is the TX rate sum of all enabled streams.

Link Capacity indicates the total rate available for traffic generation.

Global Options:

Rate Unit choices are % (default), Mbit/s, Gbit/s, frame/s, and IFG.

QoS Metrics Tags Insertion check box when selected (default)
automatically adds a stream analysis tag containing Jitter, Latency,
Throughput, and sequence tags in all frames that will be
generated.

Enable TX button allows enabling the traffic generation for all enabled
streams when the test is started. Some conditions, such as ARP not
resolved, link down, etc., may prevent the stream to be transmitted.

Copy Stream button allows to copy the stream configuration to one or
several streams.
Select the stream number the configuration will be copied from.
From To the following Streams, select all streams that will inherit the
configuration from the selected stream. An orange background
represents a selected stream. A stream that is already enabled (Enable
TX) cannot be selected for copy.
Tap Copy to confirm the stream configuration copy for all selected
streams.

Restore Default button reverts the current test application to its default
factory settings.