EXFO FTB-800 Series for FTB-1 - Manual (Page 319)

Test Results
NetBlazer 309
MPLS
MPLS
From the Test menu, tap Results, and...

for Traffic Gen and Mon, the Streams, and the MPLS tab.

for Though Mode, the Traffic, and the MPLS tab.
Label 1 and Label 2
The number of MPLS frames transmitted (TX) and received (RX) are
displayed for both Label 1 and Label 2 for each Stream (Traffic Gen and
Mon) or Service (EtherSAM). Not available for Through Mode test
application.
Total TX/RX MPLS

Line Utilization indicates the percentage of MPLS line rate utilization
in TX and RX.

Ethernet BW (%) (Ethernet Bandwidth) indicates the MPLS data rate
in TX and RX.

Frame Rate (frames/s) indicates the number of transmitted (TX) and
received (RX) MPLS frames (including bad frames).

Frame Count indicates the count of transmitted (TX) and received
(RX) MPLS EtherType (0x8847 or 0x8848) frames regardless if FCS is
good or not.