EXFO FTB-800 Series for FTB-1 - Manual (Page 230)

Test Setup - Test Configurator, Timer, and System
220 FTB-700G/800 Series
Streams - Global
Streams - Global
From the Test menu, tap Setup, Test Configurator, the protocol block, and
the Global tab.
The following parameters are displayed and configurable per stream.

Check boxes:

The first check box (top-left) allows to sequentially enable
stream(s) within the limit of the link capacity.

The check boxes next to the stream numbers allow to enable each
stream individually within the limit of the link capacity.

Stream Name
1
indicates the name of each stream. Tap on the Stream
Name button to modify the name of each stream.

Frame Size
1
indicates the frame size of each stream. Tap on the Frame
Size button to modify the frame size of each stream.

TX Rate
1
indicates the transmission rate for each stream. Tap on the
TX Rate button to modify the transmission rate (see page 226).

Framing indicates the framing of each stream. Tap on the Framing
button to modify the Network Layer, Transport Layer and VLAN (see
Modify Frame Structure from the MAC/IP/UDP tab).

VLAN indicates the ID and Priority of each VLAN level for each stream.
Tap on the VLAN button to modify the VLAN settings (see VLAN from
the MAC/IP/UDP tab).

Addressing indicates the source and destination IP addresses for each
stream. Tap on the Addressing button to modify the addressing (see
MAC and IP from the MAC/IP/UDP tab).
1. See the Profile tab for more information.