EXFO FTB-800 Series for FTB-1 - Manual (Page 345)

Test Results
NetBlazer 335
Summary
Summary
Note: Available with Transport and Ethernet (EtherBERT, Through Mode, and
Smart Loopback) test applications. For other test applications see the
corresponding test summary page.
From the Test menu, tap Results, and the Summary tab.
Status
Indicates the actual test status as follows.

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Start Time
Indicates the date and time the test has been started. The date and time is
reset every time the test is restarted or reset.
Interface
Note: Only available with CPRI/OBSAI test application.

Alarms
LOS indicates that there is no input signal.

Errors
Symbol Error indicates that invalid symbols are detected.
BER and Multi-Pattern BER
Note: See BER on page 249 for a description of each alarm/error.