EXFO FTB-800 Series for FTB-1 - Manual (Page 193)

Test Setup - Test Configurator, Timer, and System
NetBlazer 183
S-OAM
Local Parameters

MEG ID (Y.1731) is the Maintenance Entity Group Level identification
allowing to enter a 13-bytes MEG ID value/message to be generated
(default value is EXFO MEG ID). Values should be ASCII suitable
characters including the ITU T.50 Characters on page 38.
Padding allows the selection of the character (Null or Space) to used
for remaining byte values.

MAID (802.1ag and MEF) is a 45 bytes Maintenance Association
Identification that is divided in two parameters:

Domain ID is an optional domain identification text field (up to
43 bytes) set to EXFO Domain ID by default.

MA Name is a Maintenance Association Name text field set to
EXFO MA Name by default. The length of the MA Name field is
either 44 bytes minus the Domain ID field length when Domain ID
is present or 45 bytes when the Domain ID is not present.

MEG Level (Y.1731 and MEF) is the Maintenance Entity Group Level
configurable from 0 to 7 (default).

MD Level (802.1ag) is the Maintenance Domain Level and is
configurable from 0 to 7 (default).

MEP ID is the Maintenance Entity Group End Point Identification
configurable from 0x0001 (default) to 0x1FFF.
Peer MEP Parameters

MAC Address allows to enter the unique Media Access Control (MAC)
address of the peer MEP (default is 00:00:00:00:00:00).

MEP ID is the Maintenance Entity Group End Point Identification
configurable from 0x0001 (default) to 0x1FFF.

OAM Quick Ping verifies the bidirectional connectivity with the peer
MEP. The Successful message is reported when at least the one
attempt has been successful otherwise Failed is reported.