EXFO FTB-800 Series for FTB-1 - Manual (Page 342)

Test Results
332 FTB-700G/800 Series
Streams - Frame Loss / Out-of-Sequence
Streams - Frame Loss / Out-of-Sequence
From the Test menu, tap Results, Streams, and the Frame Loss /
Out-Of-Sequence tab.

Stream: Indicates the stream identification number.

Thresholds button allows to set the pass/fail thresholds (refer to QoS
Metrics on page 227).

Frame Loss: See QoS Metrics on page 275.

Out-Of-Sequence: See QoS Metrics on page 275.
Streams - Jitter
From the Test menu, tap Results, Streams, and the Jitter tab.

Stream: Indicates the stream identification number.

Jitter (ms) is measured for each stream on all valid frames
(in-sequence frames, valid Jitter tag, and no FCS error) received.
Current, Average, Minimum, Maximum, and Estimate delay values
are reported.
Note: Delay variation measurements smaller than 15 μs will be discarded, not
used for the sampling process, and “< 0.015” will be displayed as the
minimum value. For the Current value, Not measurable is displayed when
no delay has been measured in the last second.

Thresholds button allows to set the pass/fail thresholds (refer to QoS
Metrics on page 227).