EXFO FTB-800 Series for FTB-1 - Manual (Page 335)

Test Results
NetBlazer 325
S-OAM

Successful indicates the count of received LBR frames having no
errors.

Failed indicates the count of LBR frames declared as invalid.
Test

Status displays the status of the test function (refer to page 364).

TX TST indicates the count of transmitted TST frames.

RX TST indicates the count of received TST frames having their source
MAC address matching the Peer MEP MAC address, the destination
MAC address matching either the unit port Unicast MAC address or a
Multicast class 1 address
1
, and VLANs matching the unit port VLANs.

Invalid TST indicates the count of TST frames received from the peer
MEP with incorrect MEG/MD level.

Invalid Payload indicates the count of received TST frames having
either an unsupported pattern type, or bit error / pattern loss detected
in the payload.

Successful indicates the count of received TST frames having no
errors.

Failed indicates the count of TST frames declared as invalid.
Frame Delay

Status displays the status of the test function (refer to page 364).

TX DMM indicates the count of transmitted DMM frames.

RX DMR indicates the count of received DMR frames having their
source MAC address matching the Peer MEP MAC address, the
destination MAC address matching either the unit port MAC address,
and VLANs matching the unit port VLANs.
1. Refer to Unicast/Multicast Addresses for S-OAM on page 574 for more information.