EXFO FTB-800 Series for FTB-1 User Manual
Page 184
Test Setup - Test Configurator, Timer, and System
174
FTB-700G/800 Series
RFC 2544 - Subtests
Accuracy is the accuracy measurement in percentage of the line rate
(%), Mbit/s, or in Gbit/s. The accuracy is not based on the configured
Maximum Rate but on the Ethernet line rate. The accepted values are
as follows:
Validations represents the number of times the result should be
validated: 1 (default) to 50 times.
Interface
Speed
Max. Rate
%
Mbit/s
Gbit/s
10 Mbit/s
0.1 to 10.0
(default 1.0)
0.01 to 1.0
(default 0.10)
Not Applicable
100 Mbit/s
0.1 to 10.0
(default 1.0)
0.1 to 10.0
(default 1.0)
Not Applicable
1000
Mbit/s
0.1 to 10.0
(default 1.0)
1 to 100.0
(default 10)
0.001 to 0.100
(default 0.010)
10G LAN
0.1 to 10.0
(default 1.0)
10.0 to 1000.0
(default 100)
0.01 to 1.00
(default 0.10)
10G WAN
0.1 to 10.0
(default 1.0)
10.0 to 1000.0
(default 100.00)
0.01 to 1.00
(default 0.1)