Altera IP Compiler for PCI Express - Manual (Page 368)

Info–8 Chapter :
Revision History
IP Compiler for PCI Express User Guide August 2014 Altera Corporation
May 2008 8.0
■ Added information describing PCI Express hard IP IP core.
■ Moved sections describing signals to separate chapter.
■ Corrected description of cpl_err signals. 263470
■ Corrected Figure 16–3 on page 16–8 showing connections for SOPC Builder system. This
system no longer requires an interrupt.
263992
■ Improved description of Chapter 15, Testbench and Design Example . Corrected module
names and added descriptions of additional modules.
264302
260449
■ Removed descriptions of Type 0 and Type 1 Configuration Read/Write requests because they
are not used in the PCI Express endpoint.
259190
■ Added missing signal descriptions for Avalon-ST interface.
■ Completed connections for npor in Figure 5–25 on page 5–24. 257867
■ Expanded definition of Quartus II .qip file. 255634
■ Added instructions for connecting the calibration clock of the PCI Express Compiler.
■ Updated discussion of clocking for external PHY.
■ Removed simple DMA design example.
October 7.2
■ Added support for Avalon-ST interface in the MegaWizard Plug-In Manager flow.
■ Added single-clock mode in SOPC Builder flow.
■ Re-organized document to put introductory information about the core first and streamline
the design examples and moved detailed design example to a separate chapter.
■ Corrected text describing reset for ×1, ×4 and ×8 IP cores.
■ Corrected Timing Diagram: Transaction with a Data Payload.
249078
May 2007 7.1
■ Added support for Arria GX device family.
■ Added SOPC Builder support for ×1 and ×4.
■ Added Incremental Compile Module (ICM).
December
2006
7.0
■ Maintenance release; updated version numbers.
April 2006
2.1.0
rev 2 ■ Minor format changes throughout user guide.
May 2007 7.1
■ Added support for Arria GX device family.
■ Added SOPC Builder support for ×1 and ×4.
■ Added Incremental Compile Module (ICM).
December
2006
7.0
■ Added support for Cyclone III device family.
December
2006
6.1
■ Added support Stratix III device family.
■ Updated version and performance information.
April 2006 2.1.0
■ Rearranged content.
■ Updated performance information.
October 2005 2.0.0
■ Added ×8 support.
■ Added device support for Stratix ® II GX and Cyclone ® II.
■ Updated performance information.
Date Version Changes Made SPR