Teac SX-1 Reference Manual - Manual (Page 107)

Part V–Effects
TASCAM SX-1 Reference Manual
107
Routing Effects Screens
The effects routing displays let you select, configure,
and route the effects plugins.
VGA EFFECTS SLOT/ROUTING Module
This module is part of the
Effects
screen. It houses the
controls for assigning the effects algorithms to the
processor slots, and routing the audio inputs and
outputs
.
Effect Slot Selects the placement of the effect
algorithm in the DSP chain. The selections are:
Internal FX 1-4 The four available native DSP
quadrants.
Current Effect Selects an effect algorithm.
Input Routing Click on the arrow for the
Left In
and
Right In
fields to select the input source for the effect
displayed in the
Current Effect
field.
Output Routing Click on the arrow for the
Left Out
and
Right Out
fields to select the output destination for
the effect displayed in the
Current Effect
field.
LCD Effects Routing Screen
The LCD
Effects
screens mirror the VGA
Effects
screen.
EFFECTS The
EFFECTS
screen’s
ROUTING
page houses
controls for assigning the effect algorithms to a DSP
quadrant, the effect algorithm’s input source, and
output destination.
From the
MAIN DISPLAY MODES
section, press
EFFECTS
.
The
ROUTING CURSOR
soft knob can be used to select
the routing node, and
SELECT ROUTING
is used to bring
up all possible destinations for the routing.
PREV SLOT Skips back to select the previous effects
slot.
NEXT SLOT Skips forward to select the next
effects slot.
ROUTING This screen’s default page.
CLEAR SLOT Removes the effect algorithm from the
currently selected slot.