Teac SX-1 Reference Manual - Manual (Page 181)

Part VIII–Data Entry, System & File Management
TASCAM SX-1 Reference Manual
181
Drives This window shows the drives that are cur-
rently mounted.
RESCAN Press this key to rescan all connected
devices (removable media such as DVD-RAM, etc.).
EJECT Press this key to eject media (such as, a CD-
R or other removable media).
FORMAT Press this key to format a drive. This
erases all information on the drive, so be sure there is
nothing you need to save on it. Format choices are
(for external SCSI drives):
Fat 32
(PC),
HFS
(Macin-
tosh),
HFS Plus
(Macintosh). A choice of a
Low Level
Format
is also available for external SCSI drives.
Check this box to zero all data on the external drive.
TIP
Performing a low level format whenever you erase a
hard disk (or other such media) can help to keep the
drive working at peak efficiency. Also note that the only
way to format the internal drive is to reinstall the soft-
ware from the CD-ROM.
LCD Drives Screen
.From the
MAIN DISPLAY MODE
, press
PROJECT
.
Then press the
DRIVE
soft key to reach this screen.
FORMAT Press this soft key to format the selected
drive’s media. This erases all information on the
drive, so be sure there is nothing you need to save on
it. Format choices are available for external SCSI
drives:
Fat 32
(PC),
HFS
(Macintosh),
HFS Plus
(Macin-
tish).
EJECT Press this soft key to eject the selected
drive’s removable media.