Teac SX-1 Reference Manual - Manual (Page 33)

Part III–Locate, Transport, & Surround
TASCAM SX-1 Reference Manual
33
ZERO CURSOR This key clears any value that the
cursor is currently selecting.
ZERO ALL This key clears the contents of the entire
register.
ACCEPT Accepts the change.
CANCEL Declines the change.
ADD This key opens the
ADD
dialog. Use these
selections to add the devices you want to control
from the SX-1:
MMC OPEN Use this to add devices
that accept Open Loop MIDI Machine
Control Protocol to the list. This selec-
tion will be available in Version 1.5.
MMC CLOSED Use this to add
devices that require Closed Loop MIDI
Machine Control Protocol to the list.
This selection will be available in Ver-
sion 1.5
P2 This selection adds a generic P2
device. Generic transport, jog/shuttle
wheel and track arming is available. With Auto
Detect on, the SX-1 will sense from the P2 connec-
tion what kind of device is present, and should
update its display accordingly.
DTRS This selection will add a DTRS tape machine
(this family of machines includes the TASCAM DA-
88 and DA-78HR) to the list. This function will be
available in Version 1.5.
ADAT Use this selection to create a device profile
for controlling a connected ADAT. This selection will
be available in Version 1.5.
EDIT This key opens the
EDIT
dialog:
RECS This selection sets the number of
record channels that a device supports
for remote track arming.
NAME With this selection you can
name the devices in your list.
CHASE MODE This key opens the
CHASE MODE
dia-
log. Use these selections to specify whether the SX-1
will operate as a master or slave, and the type of time
code it will generate or recognize:
NONE No time code is generated or
recognized.
LTC MASTER Specifies that the SX-1
will generate Longitudinal Time Code.
LTC SLAVE Specifies that the SX-1
will chase incoming Longitudinal Time
Code.
MTC MASTER Specifies that the SX-
1 will send MIDI Time Code out its
MIDI Out jacks. You can select the
MIDI ports that are used to send MTC.
This parameter is found in the
Global
tab of the VGA
Tracks
screen.
MTC SLAVE Specifies that the SX-1 will chase
incoming MIDI Time Code at its
MTC IN
jack.