Teac SX-1 Reference Manual - Manual (Page 86)

Part IV–Mixer Controls
86
TASCAM SX-1 Reference Manual
Automation Controls
Front Panel Controls
All the automation modes can be entered from the
SX-1’s front panel as well as through associated
LCD and VGA screens. However, the front panel
controls give you direct and immediate access to the
automation modes without needing to be on an auto-
mation screen.
The keys in this section access all of the mixer’s
automation States and Modes. TOUCH/KEEP Use the
TOUCH/ KEEP
key to use
the Touch function, which overwrites soft knob or
rotary encoder data at the current setting, erasing pre-
vious moves. Since these controls are not touch-sen-
sitive, this is a useful way to erase previous mix
moves on these controls.
The relationship between the previous mix moves
and the moves made using the touch function is
shown below:
8 sec
8 sec
+12
+6
+3
0
-3
-6
-12
+12
+6
+3
0
-3
-6
-12
1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 7 sec
1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 7 sec
-9
Existing Move
Mix Move
Press/Hold
TOUCH
&
Move control
New Move Auto or Manual
Revert
Control
Writing
Revert
Time