Teac SX-1 Reference Manual - Manual (Page 128)

Part VI–Audio tracks
128
TASCAM SX-1 Reference Manual
VGA that is accessed from the
SX-1
menu of the Main
Menu Bar.
SMPTE FORMAT Sets the time format for the
EDIT
REGION
registers. The choices are: SMPTE,
hours:minutes:seconds, bars:beats:ticks, feet:frames,
or samples
SET TO DEFAULT Sets the highlighted parameter
back to its factory default value.
NUDGE LEFT & NUDGE RIGHT These soft
keys let you move your selected region forward or
backward in time by the nudge amount given in the
NUDGE SETTING
field and the Nudge type set in the
Nudge Mode
field.
Editing
TIP
Before you can perform an edit, you must first select an
event to modify. If you need to create an event, simply
drag across a track with the mouse and hit the
Split key.
Alternatively, create the Edit Begin and End points with
the Capture key and then select Split .
CUT Use
CUT
to remove a selected region. A gap is
left between the Edit In and Out points, and the cut
contents are placed in the SX-1’s temporary clip-
board.
COPY Use
COPY
to send the selected region to the
clipboard. The clipboard contents (the copied region)
can then be pasted to a new location.
Selected Region
Audio Before Cut
Audio After Cut
Clipboard
Selected Region
Audio Before Copy
Audio After Copy
Clipboard
In Out
Copied Region