Teac SX-1 Reference Manual - Manual (Page 66)

Part IV–Mixer Controls
66
TASCAM SX-1 Reference Manual
Aux Send Masters
Master levels for the Aux Sends are reached through
the Fader Banks. To see them on the VGA, make
sure the
Mixer
screen is selected (press
MIX
in the
MAIN DISPLAY MODE
. From the
FADER BANK
section, press
BANK MODE
so that the
<PRESET>
LED is on.
Then press
BUSS/ AUX
to reach this screen.
TIP
Keep in mind that it’s not necessary to have a Fader
screen up just to move an Aux send level. If the Aux
send fader bank has been recalled to the surface, you
can just move the faders directly on the mixer while
leaving a different screen on the display.
LCD Aux Send Controls
Aux Send controls on the LCD are available directly
on the
MIXER CHANNEL
screen.
Press either
MIXER
or
CHANNEL
in the
MAIN
DISPLAY MODE
section. Use the keypad’s arrow
keys to scroll to the Aux Send field you want to
adjust. Then use the soft knobs to adjust the Aux
Sends.