Paradyne T1 T1 Access Mux 926x - Manual (Page 101)

Setting Up
5-47 9161-A2-GH30-30 April 1998
Clearing Port Assignments
Clearing port assignments sets the selected timeslots to unassigned. You can
clear all port assignments for:
H This device
H
A specified slot
H A specified interface
"
Procedure
1. Follow this menu selection sequence:
Configuration Edit/Display
→
Cross Connect
→
Clear Assignments
2. Select one of the following:
To clear . . . Then select . . .
All assignments for the DSX-1 time slots,
Network time slots, voice ports, and
Sync Data ports Clear All
All assignments for the Network 1
Interface time slots Clear Network 1 Interface Time Slots
All assignments for the Network 2
Interface time slots Clear Network 2 Interface Time Slots
All assignments for the DSX01-1 time
slots on a 9161 Single T1 NAM Clear DSX01-1 Time Slots
Assignments for the synchronous data
ports on the NAM in slot
ss
Clear Slot ss – NAM Sync Data Ports
All assignments for the DSX-1
interface 1 time slots in slot
ss
Clear DSX ss-1 Interface Time Slots
All assignments for the DSX-1
interface 2 time slots in slot
ss
Clear DSX ss-2 Interface Time Slots
Assignments for timeslots or ports on the
APM in slot
ss
Clear Slot ss – xxxxx
where xxxxx = name or type of APM