Paradyne T1 T1 Access Mux 926x - Manual (Page 96)

Setting Up
5-42 9161-A2-GH30-30 April 1998
Table 5-8. Signaling and Trunk Conditioning Values (2 of 2)
Network
Side Value
DSX-1 Side
Default
Value
Meaning
FXOD-idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for an
FXODN interface (ABCD = 0000). FXSD-idle
FXOD-busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for an
FXODN interface (ABCD = 1111). FXSD-busy
FXSD-idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for an
FXSDN interface (ABCD = 0000). FXOD-idle
FXSD-busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for an
FXSDN interface (ABCD = 1111). FXOD-busy
PLAR3idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for a PLAR
D3 interface (ABCD = 0000). PLAR3idle
PLAR3busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for an
PLAR D3 interface (ABCD = 1111). PLAR3busy
PLAR4idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for a PLAR
D4 interface (ABCD = 1111). PLAR4idle
PLAR4busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for an
PLAR D4 interface (ABCD = 0000). PLAR4busy
DPO-idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for a DPO
interface (ABCD = 0000). DPT-idle
DPO-busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for a DPO
interface (ABCD = 1111). DPT-busy
DPT-idle The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the idle state for a DPT
interface (ABCD = 0000). DPO-idle
DPT-busy The signaling bits transmitted to the cross-connected T1
interface during a CGA represent the busy state for a DPT
interface (ABCD = 1111). DPO-busy
USER- xxxx The signaling bits transmitted to the cross-connected T1
interface during a CGA represent a user-defined pattern of
ABCD =
xxxx.
USER- xxxx 1
1 xxxx is the same value on both the Network and the DSX-1 sides.