Paradyne T1 T1 Access Mux 926x - Manual (Page 129)

Setting Up
5-75 9161-A2-GH30-30 April 1998
Table 5-17. SNMP Trap Options (1 of 3)
SNMP Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if SNMP trap messages are sent to the currently configured trap
manager(s).
Enable – Sends trap messages.
Disable – Does not send trap messages.
Number of Trap Managers
Possible Settings: 1 – 6
Default Setting: 1
Specifies the number of SNMP management systems to receive SNMP trap messages
from the NAM. An NMS IP Address must be configured in the NMS
n IP Address
configuration option for each trap manager to receive trap messages.
1 – 6 – Specifies the number of trap managers.
NMS n IP Address
Possible Settings: 000.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the IP address that identifies the SNMP manager(s) to receive SNMP traps.
H NMS n IP Address appears for each trap manager specified in the Number of Trap
Managers configuration option.
000.000.000.000 – 223.255.255.255 – Adds to or changes the IP address for the trap
manager. The first digit (i.e.,
xxx.255.255.255) cannot be 0 or 127, or greater than 223.
However, 000 is valid, representing a null address.
Clear – Clears the IP address and fills the address with zeros (i.e., 000.000.000.000).