Paradyne T1 T1 Access Mux 926x - Manual (Page 171)

Operation and Maintenance
8-3 9161-A2-GH30-30 April 1998
"
Procedure
Upon beginning a session, the User Interface Idle screen is displayed. To
activate:
1. Press Return.
2. One of the following occurs:
I f . . . Then . . . What to do now?
Security is disabled The Main Menu screen
appears. Begin your session.
Security is enabled You are prompted for a
login ID and password. Enter your ID and password.
If Invalid Password
appears, see
System Error
Messages in Chapter 9,
Troubleshooting.
You are attempting to
access through Telnet
and the user interface is
currently in session The message
Connection refused:
appears. (T1 access unit
allows only one
connection at a time.) Wait and try again.
You are attempting direct
access through the COM
port and the user
interface is currently in
session via an in-band
Telnet session The message User
Interface Already In
Use appears with the
active user’s IP address. See System Status
Messages in Chapter 7,
Displaying System
Information.
The T1 access unit has
the Communication Port
and Login Required
configuration options
enabled and there is no
contention for the user
interface The Login screen
appears. Enter your ID and password.
If Invalid Password
appears, see
System Error
Messages in Chapter 9,
Troubleshooting.