Paradyne T1 T1 Access Mux 926x - Manual (Page 240)

Menus and Configuration Worksheets
A-14 9161-A2-GH30-30 April 1998
Device Name: ___________________________________________________________
Management and Communication
Configuration Option Settings Default in [Bold]
Communication Protocol See Table 5-14
Node IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Node Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
Default Network Destination [None], COM, FDL1, FDL2, DDL, EDL ss-p
Communication Port IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Communication Port Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
Communication Port Link Protocol [PPP], SLIP
Alternate Communication Port IP
Address
1
[000.000.000.000] – 223.255.255.255, Clear
Alternate Communication Port
Subnet Mask [000.000.000.000] – 255.255.255.255, Clear
General SNMP Management See Table 5-15
SNMP Management Enable, [Disable]
Community Name 1 ASCII text entry [Public], Clear
Name 1 Access [Read], Read/Write
Community Name 2 ASCII text entry, [Clear]
Name 2 Access [Read], Read/Write
SNMP NMS Security See Table 5-16
NMS IP Validation Enable, [Disable]
Number of Managers [1] – 10 [1]
NMS n IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Access Level [Read], Read/Write
SNMP Traps See Table 5-17
SNMP Traps Enable, [Disable]
Number of Trap Managers [1] – 6 [1]
NMS n IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Destination [Default], COM, FDL1, FDL2, DDL, EDL ss-p
General Traps Disable, Warm, AuthFail, [Both]
Enterprise Specific Traps Enable, [Disable]
Link Traps Disable, Up, Down, [Both]
Link Traps Interfaces Network, DSX-1, T1s, Ports, [All]
1 The first byte cannot be set to 0 nor 127. However, the null address of 0.0.0.0 is valid
after performing a Clear.