Paradyne T1 T1 Access Mux 926x - Manual (Page 150)

Displaying System Information
7-8 9161-A2-GH30-30 April 1998
The Cross Connect Status Field
(bottom) . . .
Indicates . . .
D ss-p/yy The DSX-1 on slot ss, port p, time slot yy
is assigned to the Network Interface time
slot (01 to 24).
D ss-p/yyr The DSX-1 on slot ss, port p, time slot yy
is assigned to the Network Interface time
slot (01 to 24), using Robbed Bit Signaling
(r ).
RsvdAPM The time slot is assigned to an APM which
is either:
H failed,
H removed or not installed, or
H has been replaced by an APM type that
is not compatible with the configuration.
DDL The time slot is reserved for a
management path using Direct Data Link
(DDL).
Slot Assignment information. NAM or APM physical slot assignment
information appears below the time slot fields.
The following information is available for viewing.
Physical Slot . . . Identifies the assigned card type . . .
01 to 14 (based on model) T1 NAM – T1 NAM.
Empty – The slot is empty.
02 to 05 (based on model) Sync Data – 4-port synchronous data APM.
DSX-1 – 2-port Dual DSX APM.
E&M Voice – 8-port E&M Voice APM.
FXO Voice – 8-port FXO Voice APM.
FXS Voice – 8-port FXS Voice APM.
OCU (2) – 2-port OCU-DP APM.
OCU (6) – 6-port OCU-DP APM.
Empty – The slot is empty.
Misconfig – The slot contains a misconfigured APM.
Unsupport – The slot contains an unrecognized APM.
Failed – The slot contained an APM that has been
removed or is no longer operational.