Paradyne T1 T1 Access Mux 926x - Manual (Page 257)

SNMP Traps
C-5 9161-A2-GH30-30 April 1998
The tests that support these traps and conditions that define enterpriseTestStart
and enterpriseTestStop for each interface:
Interface
enterpriseTestStart/Stop
Variable-Bindings
For These Tests
Network and DSX-1
T1 Interfaces H ifIndex (RFC 1573)
H ifAdminStatus
(RFC 1573)
H ifOperStatus (RFC 1573)
H i fType (RFC 1573)
H All
H dsx1SendCode
(RFC 1406) H Remote Line Loopback
H Send 511 pattern
H Send 3 in 24
H Send QRSS
H dsx1LoopbackConfig
(RFC 1406) H Line Loopback
H Payload Loopback
H devDS1TestType
(devDS1Config.mib) H Repeater Loopback
H Send All Zeroes
H Send All Ones
H Send 1-in-8
H Send 63
H Send 2047
H Send 2 15 -1
H Send 2 20 -1
H Send user-defined pattern
H All Monitor patterns
Synchronous
Data Ports H ifIndex (RFC 1573)
H ifAdminStatus
(RFC 1573)
H ifOperStatus (RFC 1573)
H i fType (RFC 1573)
H devSyncPortTestType
(devDataPortConfig.mib)
H DTE Loopback
H DTE Payload Loopback
H Data Channel Loopback
H Send V.54 Loopback
H Send FT1 Loopback
H Send pattern tests
H Monitor pattern tests