Paradyne T1 T1 Access Mux 926x - Manual (Page 166)

Displaying System Information
7-24 9161-A2-GH30-30 April 1998
Test Status Messages
The right-most column of the System and Test Status screen display the tests
that are currently active on the card (NAM or APM) (see Table 7-4).
Table 7-4. Test Status Messages (1 of 2)
Message What It Indicates
No Test Active No tests are currently running.
Network n LLB Test Active A network Line Loopback (LLB) test is active on specified
Network interface (
n).
DSX ss-p LLB Test Active A DSX-1 Line Loopback (LLB) test is active on slot ss,
port p.
Network n PLB Test Active A network Payload Loopback (PLB) test is active on
specified Network interface (
n).
DSX ss-p PLB Test Active A DSX-1 Payload Loopback (PLB) test is active on slot ss,
port p.
Network n RLB Test Active A network Repeater Loopback (RLB) test is active on
specified network interface (
n).
DSX ss-p RLB Test Active A DSX-1 Repeater Loopback (RLB) test is active on slot
ss, port p.
DCLB, Slot ss Port p A Data Channel Loopback (DCLB) test is active on slot ss,
port p.
DTLB, Slot ss Port p A Data Terminal Loopback (DTLB) test is active on slot ss,
port p.
DTPLB, Slot ss Port p A Data Terminal Payload Loopback (DTPLB) test is active
on slot
ss, port p.
Latching OCU LB, Slot ss
Port p
A Latching OCU Loopback test is on the OCU-DP
interface in slot
ss, port p.
Non-Latching OCU LB,
Slot
ss Port p
A Nonlatching OCU Loopback test is on the OCU-DP
interface in slot
ss, port p.
Latching CSU LB, Slot ss
Port p
A Latching CSU Loopback test is on the OCU-DP
interface in slot
ss, port p.
Non-Latching CSU LB,
Slot
ss Port p
A Nonlatching CSU Loopback test is on the OCU-DP
interface in slot
ss, port p.
Latching DSU LB, Slot ss
Port p
A Latching DSU Loopback test is on the OCU-DP
interface in slot
ss, port p.
Non-Latching DSU LB,
Slot
ss Port p
A Nonlatching DSU Loopback test is on the OCU-DP
interface in slot
ss, port p.
OCU Line LB, Slot ss
Port p
An OCU Line Loopback test is on the OCU-DP interface in
slot
ss, port p.
OCU Data LB, Slot ss
Port p
An OCU Data Loopback test is on the OCU-DP interface
in slot
ss, port p.