Paradyne T1 T1 Access Mux 926x - Manual (Page 117)

Setting Up
5-63 9161-A2-GH30-30 April 1998
Table 5-12. Telnet/FTP Session Options (2 of 2)
FTP Session
Possible Settings: Enable, Disable
Default Setting: Disable
Determines whether the T1 access unit responds as a server to an FTP session request
from an FTP client on an interconnected IP network. Must be enabled when
downloading files.
Enable – Allows an FTP session between the T1 access unit and an FTP client.
Disable – Does not allow an FTP session.
FTP Login Required
Possible Settings: Enable, Disable
Default Setting: Disable
Determines whether a user ID and password is required for an FTP session. If required,
the login used is the same login used for an async terminal interface session.
Enable – User is prompted for a user ID and password for an FTP session.
Disable – User is not prompted for a user ID and password for an FTP session.