Paradyne T1 T1 Access Mux 926x - Manual (Page 146)

Displaying System Information
7-4 9161-A2-GH30-30 April 1998
View this field . . . To find the . . .
For the FXO Voice APM
Port Status Status of the port.
Assigned To Interface the port is assigned to.
Operating Mode Operating mode of the voice port that was configured
using the Operating Mode configuration option on the
Voice Ports screen. See the
Technical Reference for
configuration information.
Signaling Type Type of signaling used by the voice port that was
configured using the Signaling Type configuration option
on the Voice Ports screen. See the
Technical Reference
for configuration information.
Call Progress Current condition of the port.
TX ABCD bits Current value of the ABCD signaling bits that are being
transmitted to the T1 interface.
RX ABCD bits Current value of the ABCD signaling bits that are being
received from the T1 interface.
T-R Control Current status of the tip and ring leads:
H Loop. Tip and Ring are connected together.
H Rgnd. Ring lead is attached to ground.
H Open. Ring lead is not connected to either the Tip
lead or the ground.
H Lpgnd. Tip and Ring are connected together, and are
connected to ground.