Paradyne T1 T1 Access Mux 926x - Manual (Page 149)

Displaying System Information
7-7 9161-A2-GH30-30 April 1998
Displaying Cross Connect Status
Slot assignments are made using the Cross Connect configuration option. See
Assigning Cross Connections in Chapter 5, Setting Up, for making time slot
assignments. Use the Cross Connect Status screen to display time slot
assignments for:
H
Network Channels
H
DSX-1 Channels
H
Ports
Displaying Network Channels
Use the Network Channel Display screen to display DS0 assignments for each
DS0 on the network interface. This screen also provides information on the slot
assignment for each NAM or APM type.
Use the following menu sequence to display network channel information.
Main Menu
→
Status
→
Cross Connect Status
→
Network Channel Display
Select the desired network interface: 1 for Network 1, 2 for Network 2 (only the
Model 926x provides Network 2).
The Network Channel Display screen displays 24 two-field entries in three rows.
Together, each two-field entry defines the assignment for one Network interface
time slot. The top field represents the time slot of the Network Interface. The
bottom field represents the cross connect status of the associated (top field)
network time slot.
The following information is available for viewing.
The Network Time Slot Fields (top) . . . Indicates . . .
N01 to N24 The Network Interface time slot (01 to 24).
The Cross Connect Status Field
(bottom) . . .
Indicates . . .
Unassgn The time slot is unassigned.
S ssPp The voice or sync data port ( p) of slot (ss)
is assigned to the Network Interface time
slot (01 to 24).
Net n/yy Network n (1 or 2) time slot yy is assigned
to the Network Interface time slot (01 to
24), using Clear Channel.
Net n/yyr Network n (1 or 2) time slot yy is assigned
to the Network Interface time slot (01 to
24), using Robbed Bit Signaling (r ).