Paradyne T1 T1 Access Mux 926x - Manual (Page 132)

Setting Up
5-78 9161-A2-GH30-30 April 1998
Setting Up and Placing a Call
Configure your external device. Then, use the Call Setup screen to:
H Look up the desired telephone number
H
Dial a call
H Disconnect a call
"
Procedure
1. Follow this menu selection sequence:
Main
→
Control
→
Call Setup
2. The Control menu appears. Select Call Setup and press Return.
3. The Call Setup screen appears. Enter the number of the directory containing
the desired telephone number in the Directory Number field. The telephone
number appears in the Directory Phone Number field. See
Displaying
Directory Numbers and Changing Directory Numbers in Chapter 9,
Troubleshooting and Maintenance, for information about the call directory.
4. Select Dial and press the Enter key to initiate dialing.
5. To end the call, select Disconnect and press the Enter key.