Paradyne T1 T1 Access Mux 926x - Manual (Page 165)

Displaying System Information
7-23 9161-A2-GH30-30 April 1998
Table 7-3. Self-Test Results Messages
Message What It Indicates What To Do
CPU Fail The CPU failed internal
testing. 1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
NAM Fail One or more of the NAM’s
integrated circuit chips failed
internal device level testing. 1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
Network n T1 Fail The NAM failed to internally
loop data on the selected
Network T1 circuit. 1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
DSX ss-p T1 Fail The NAM failed to internally
loop data on the selected
DSX-1 circuit. 1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
Memory Fail The unit failed memory
verification. 1. Reset the unit and try
again.
2. Call your service
representative for
assistance.
3. Return the unit to the
factory.
Failure xxxxxxxx An internal failure occurred.
(xxxxxxxx represents an
eight-digit hexadecimal failure
code for use by service
personnel.) Record the failure code and
contact your service
representative.
Passed No problems were found
during power-up. No action needed; no
problems were found during
power-up or reset.