Paradyne T1 T1 Access Mux 926x User Manual
Page 113
Advertising
Setting Up
5-59
9161-A2-GH30-30
April 1998
Table 5-11.
External Device (COM Port) Options (3 of 3)
Disconnect String
Possible Settings: ASCII text entry, Clear
Default Setting: Clear
Specifies the command used to disconnect an external device. Only used by the
T1 access unit when External Device Commands is set to Other.
ASCII Text Field – Adds to or changes the Disconnect String (maximum 20 characters).
Refer to the
Control Characters table on page 5-60
Clear – Clears and sets the Disconnect String
.
H
Disconnect String only appears if External Device Commands is set to Other.
Advertising