Paradyne T1 T1 Access Mux 926x - Manual (Page 264)

SNMP Cross-Reference
D-6 9161-A2-GH30-30 April 1998
Table D-1. SNMP MIB to User Interface Command Cross-Reference (6 of 16)
User Interface Command SNMP MIB Object
main/status/performance/port (cont’d)
Far-End 8 Hour Totals:
Valid Intervals
ES
UAS
SES
BES
LOFC
Complete
Far-End Clear Statistics:
For the port, Read value in:
devEDLFarEndTotalValidIntervals
devEDLFarEndTotalESs
devEDLFarEndTotalUASs
devEDLFarEndTotalSESs
devEDLFarEndTotalBESs
devEDLFarEndTotalLOFC
devEDLFarEndTotalCmpl
For the port, Set devEDLClrRegWhichRegs to farRegisters and
devEDLClrRegAction to clear.
main/status/performance/clear_statistics:
Network
All Synchronous Data Ports
Set:
devUserClrReg
Set devEDLClrRegWhichRegs to nearRegisters and farRegisters
and devEDLClrRegsAction to clear.
main/status/identity:
Serial Number
Model Number
Software Revision
Hardware Revision
System Name
System Contact
System Location
APM Type
Read:
sysDescr object from the System group
sysDescr object from the System group
sysDescr object from the System group
sysDescr object from the System group
sysName object from the System group
sysContact object from the System group
sysLocation object from the System group
ifDescr object for the interface