Paradyne T1 T1 Access Mux 926x - Manual (Page 49)

User Interface
4-5 9161-A2-GH30-30 April 1998
Navigating the Screens
You can navigate the screens by:
H Using keyboard keys
H
Switching between the two screen work areas
H Using screen function keys
Keyboard Keys
Use the following keyboard keys to navigate within the screens.
To . . . Press . . .
Move cursor between the screen area and
the screen function keys area Ctrl-a
Return to the previous screen Esc
Move cursor to the next field Right Arrow (on same screen row), or
Tab (on any screen row)
Move cursor to the previous field Left Arrow (on same screen row), or
Ctrl-k
Move cursor one position to the left. If the
cursor is at the beginning of a field,
Backspace has no effect. Backspace
Move cursor to the first character of the
previous field (backtab) Ctrl-k
Display the next valid value for the field Spacebar
Delete character that the cursor is on Delete (Del)
Move cursor up one field within a column on
the same screen Up Arrow or Ctrl-u
Move cursor down one field within a column
on the same screen Down Arrow or Ctrl-d
Move cursor one character to the right if in
edit mode Right Arrow or Ctrl-f
Move cursor one character to the left if in edit
mode Left Arrow or Ctrl-b
Redraw the screen display, clearing
information typed in but not yet entered Ctrl-l
Accept entry or display valid options on the
last row of the screen when pressed before
entering data or after entering invalid data Return (Enter)