Paradyne T1 T1 Access Mux 926x - Manual (Page 156)

Displaying System Information
7-14 9161-A2-GH30-30 April 1998
Displaying Performance Statistics
Use the following menu sequence to display network performance statistics.
Main Menu
→
Status
→
Performance Statistics
→
Network
For Network statistics, you must select the Network Interface (1 or 2) for which
you want to display statistics. Only the Model 926x provides Network 2.
Use the following menu sequence to display sync data performance statistics.
Main Menu
→
Status
→
Performance Statistics
→
Sync Data Port
For Sync Data statistics, you must select the desired slot and port for which to
collect statistics.
Selecting Performance Statistics Intervals for Display
Only seven intervals appear on the screen at any one time. You can choose
which intervals to display on your screen by entering:
H
Interval Number, or
H Time
NOTE:
Interval 01 is the interval occurring just prior to the current one; Interval 02 is
2 intervals prior to the current one, etc.
To select intervals . . . You must enter an interval or time on . . .
Occurring on and after a
selected interval or time Line 16. The display will include the selected interval plus
the 6 intervals recorded after it.
Occurring on and before a
selected interval or time Line 10. The display will include the selected interval plus
the 6 intervals recorded before it.
Bracketing a selected
interval or time Line 13. The display will include the selected interval plus
the 3 intervals recorded before it and the 3 intervals
recorded after it.