Extension cables – Paradyne T1 T1 Access Mux 926x User Manual

Page 289

Advertising
background image

Cables, Connectors, and Pin Assignments

E-15

9161-A2-GH30-30

April 1998

Extension Cables

Extension cables can be ordered for use with the 50-pin FXO, FXS and E&M
Voice APM connectors. They are all straight-through cables (i.e., Pin 1 on the
voice APM side is Pin 1 on the M66 block side of the cable), and they coincide
with the pins on the 50-pin APM connector.

The following table identifies these cables, indicates the voice APM it is used
with, and describes when you might use each:

Extension Cables

Extension Cable

Length Voice APM When Used

1 Amphenol plug-to-
1 Amphenol plug
cable

(Twisted pair/25-pair:
1-26, 2-27, 3-28 . . .
25-50)

3

E&M
FXO
FXS

To connect the voice APM’s 50-pin
Amphenol connector to the M66 block.

When the M66 block is further than five
feet from the APM connector, used as an
extension to the 5-foot cable normally
used.

See

FXO/FXS Voice APM Connector

on

Page E-12 or

E&M Voice APM

Connector

on Page E-13 for pin

assignments.

1 Amphenol socket-

to-1 Amphenol plug

cable

(Twisted pair/25-pair:
1-26, 2-27, 2-28 . . .
25-50)

25

E&M
FXO
FXS

When the M66 block is further than five
feet from the APM’s connector, used as
an extension to the 5-foot 1 Amphenol
plug-to-1 Amphenol plug cable.

See

FXO/FXS Voice APM Connector

on

Page E-12 or

E&M Voice APM

Connector

on Page E-13 for pin

assignments.

3 Amphenol plugs-to-
1 Amphenol plug
connector assembly

(Twisted pair: T1-R1
. . .T24-R24, S1-S2)

6

FXO
FXS

To condense three voice APMs onto the
single M66 block connector.

Extend the cable using the 25-foot
1 Amphenol socket-to-1 Amphenol
plug 25-pair cable.

See

3 Amphenol Plugs-to-1 Amphenol

Plug Cable

on Page E-17 for pin

assignments.

3 Amphenol plugs-to-
4 Amphenol plugs
connector assembly

(Twisted pair: T1-R1
. . .T24-R24,
TR1-RR1 . . .
TR24-RR24,
M1-E1 . . . M24-E24,
SG1-SG1 . . .
SG3-SG3)

6

E&M

To consolidate signals from three voice
APMs and segregate four applications
onto four M66 blocks (e.g., all transmit
signals on one block, all receive signals
on a second block, all E&M signals on a
third, and all battery and signal ground
signals on the fourth).

Extend the cable using the 25-foot
1 Amphenol socket-to-1 Amphenol
plug 25-pair cable.

See

3 Amphenol Plugs-to-4 Amphenol

Plugs Cable

starting on Page E-19 for

pin assignments.

Advertising