Voice apm front panel led, System alarm relay – Paradyne T1 T1 Access Mux 926x User Manual
Page 193
OK
9109 FXO
97-15643
Troubleshooting
9-11
9161-A2-GH30-30
April 1998
Voice APM Front Panel LED
The E&M, FXO, and FXS Analog Voice APMs each have 1 LED status indicator.
General Status LED
Label
Indication
Color
What It Means
OK
Power and
Operational
Status
Green
ON
– APM has power and is operational.
OFF – APM is in a local self-test, or there is a
failure.
System Alarm Relay
The 5-slot housing and the access carrier provide an alarm system relay that you
can configure to activate when an alarm condition is present. To use the system
alarm relay, you must:
H
See the 5-slot housing or access carrier installation instructions for
information on how to connect the alarm relay connector.
H
Set the following configuration option:
Main Menu
→
Configuration Edit/Display
→
Alarm Options
→
System
Alarm Relay
→
Enable
H
Ensure that the System Alarm Relay Cut-off under the Control branch is not
selected. This menu selection turns off the system alarm relay.