Paradyne T1 T1 Access Mux 926x - Manual (Page 46)

User Interface
4-2 9161-A2-GH30-30 April 1998
Main Menu Screen
Access to all of the T1 access unit’s tasks begins at the Main Menu screen, which
has four menus or branches.
The login’s access level appears at the top of the screen unless no security has
been set up. Menu branches are filtered based on effective security level, which
is the lower of the Session Access Level (Telnet/FTP Session options) and the
Login ID access level (Administer Logins under the Control branch).
Select . . . To . . . Security Level
Status View diagnostic tests, voice interfaces, cross
connections, statistics, and T1 access unit
identity information. 1, 2, 3
Test Select, monitor, and cancel test for the system’s
interfaces. 1, 2
Configuration Display and edit the configuration options. 1, 2, 3
Control Control the user interface for call setup, device
naming, date and time, login administration,
and system alarm relay cut-off (for the 5-slot
housing). Also, initiate a power-on reset of the
system. 1
Screen Field Types
Three types of screen fields are available on the async terminal.
Use screen field . . . To . . .
Menu selection Display a list of available functions for user selection.
Input Add or change information on a screen.
H Underlines in the field value or selection indicate an input
or edit field.
Display Display configuration information and results from
performance and system-specific tests.
H No underlines in the field value or selection indicate a
display-only field.