Paradyne T1 T1 Access Mux 926x - Manual (Page 237)

Menus and Configuration Worksheets
A-11 9161-A2-GH30-30 April 1998
Device Name: ___________________________________________________________
Copy Ports
Configuration Option Settings Default in [Bold]
From: Slot ss 2-Slot: 01, 02
5-Slot: 01, 02, 03, 04, 05
From: Port p T1 NAM: 1, 2
Sync Data APM: 1, 2, 3, 4
Voice APM: 1, 2, 3, 4, 5, 6, 7, 8
OCU-DP (2-port): 1, 2
OCU-DP (6-port): 1, 2, 3, 4, 5, 6
Type T1 NAM, Sync Data, FXS Voice, FXO Voice, E&M
Voice, OCU-DP
To: Slot ss 2-Slot: All, 01, 02
5-Slot: All, 01, 02, 03, 04, 05 [lowest numbered
slot containing the same port type]
To: Port p All, 1, 2, 3, 4, 5, 6, 7, 8
Perform Copy n/a
Perform Copy Then Increment n/a
System Options See Table 5-9
Configuration Option Settings Default in [Bold]
Generate Yellow Alarm Signals [Enable], Disable
Test Timeout [Enable], Disable
Test Duration (min) 1 – 120 [10]
Primary Clock Source [Net1], Net2, DSX ss-p, Internal, External, Sync
Data
Port (for Primary Clock Source) S ss Pp [the first available port]
Secondary Clock Source Net1, Net2, DSX ss-p, [Internal], External, Sync
Data
Port (for Secondary Clock Source) S ss Pp [the first available port]
External Clock Rate (KHz) 8, [1544], 2048
Primary Clock Failure Alarm [Enable], Disable
Secondary Clock Failure Alarm [Enable], Disable